Join Our Newsletter

New? Free Sign Up

Then check our Welcome Center to a Community Caring about Sleep Apnea diagnosis and Sleep Apnea treatment:

CPAP machines, Sleep Apnea surgery and dental appliances.

CPAP Supplies

Latest Activity

Steven B. Ronsen updated their profile
Mar 5
Dan Lyons updated their profile
Mar 7, 2022
99 replied to Mike's discussion SPO 7500 Users?
"please keep me updated about oximeters "
Dec 4, 2021
Stefan updated their profile
Sep 16, 2019
Profile IconBLev and bruce david joined SleepGuide
Aug 21, 2019
Hi there, I'm on day 3 of my CPAP treatment using a ResMed 8 Series II machine and a humidifier.

Towards the morning, when I start inhaling with the mask on, it sounds like I'm blowing through a straw -- the water is gurgling and then water hits my nose. It's not like I'm drowning, but just enough to be annoying.

Is it because I'm out of water in the humidifier, or is there too much water? I tried the trouble shooting, but I still have the problem. Would love any help.

Views: 145

Reply to This

Replies to This Discussion

If you haven't filled your humidifier tank above the line it isn't that you've added too much distilled water (you ARE using ONLY distilled water in your humidifier, right?)

What is most likely is that this is "rain out" caused by condensation caused by the difference between the water temperature and temperature of the air surrounding the hose.

There are several ways to eliminate this. 1] Turn your humidifier temperature down to a level that provides enough humidity for you but doesn't cause the rain out. 2] Be sure your xPAP and humidifier sit BELOW the level of the top of your mattress. 3] Take your hose under your covers w/you. 4] Hang your hose above your head. 5] Buy or make a hose cover (slippery material is best). 6] Buy an "aussie heated hose".
I had the same problem my first night and promptly purchased a hose huggie and haven't had the problem since. I've been using cpap since June 3/09. My big issue now is going to sleep with the mask on but waking up with it on the table with the machine still running with no memory of taking it off lol.
I am a newbie as well. The rainout used to happen to me all the time. The first time it happened I thought the CPAP was broken, and that I was going to drown! :)
I sleep with the bedroom cold, and my humidifier kinda high. So from reading this forum I found out what that was all about. I had to hold the hose high and let the water drain back into the tank. Then I made a hose huggie out of satin strips which insulates the hose, now it never happens! I think it is easier just to purchase a hose huggie on line....

Good luck to you on your CPAP journey. You found a great forum with a lot of caring, helpful people.
Thanks for the help.

I am only using distilled water and the CPAP is below my mattress. I set it up on "3" or "III" because the manual said to start out with that.

Sorry to be annoying, but what is a hose huggie and where can I find it?

Thanks!

BeeAsleep said:
I am a newbie as well. The rainout used to happen to me all the time. The first time it happened I thought the CPAP was broken, and that I was going to drown! :)
I sleep with the bedroom cold, and my humidifier kinda high. So from reading this forum I found out what that was all about. I had to hold the hose high and let the water drain back into the tank. Then I made a hose huggie out of satin strips which insulates the hose, now it never happens! I think it is easier just to purchase a hose huggie on line....

Good luck to you on your CPAP journey. You found a great forum with a lot of caring, helpful people.
Here is one place you can get them.

http://padacheek.com/PAC_Hosecover.html
you can also of course get a nice fleece hose cover at ApneaLife.com -- look for Snuggle Hose hose cover

Dan Lyons said:
Here is one place you can get them.

http://padacheek.com/PAC_Hosecover.html
Hose covers can be cheaply made for those that do not want to the expense of purchasing one.

Tube socks with the toe cut out works. It will take more than one sock, but if you can't sew and have some socks that are clean, but are worn in areas, they will work. Use rubber bands or duct tape to keep them in place.

Fleece can be purchased at most WalMarts, cut into strips and sewn together and then the side seam sewn. Use rubberbands to keep the cover in place or use hair pony-os.

If you don't sew and still would like a fleece cover you can velcro it on. Use some of the strips that are available at your local Dollar Tree and place every so often to keep the fleece closed and in place.
Ahhhhh! Velcro! Every woman's duct tape!

Reply to Discussion

RSS

© 2024   Created by The SleepGuide Crew.   Powered by

Badges  |  Report an Issue  |  Terms of Service