Replies to This Discussion

Permalink Reply by 99 on December 17, 2010 at 12:37pm

you have a Res Med VPAP Adept SV and need to down load Resmed software some you pay for some are free if you find the right site

• ▶ Reply

Permalink Reply by Greg Kroemer on December 17, 2010 at 1:13pm

99 said:

you have a Res Med VPAP Adept SV and need to down load Resmed software some you pay for some are free if you find the right site

 

 

Is there specific ResMed software and how do I find the right site to download it?

 

• ▶ Reply

Permalink Reply by Mary Z on December 17, 2010 at 1:34pm

You need the ResMed software. Anything from 3.7 to 3.12 should work.  What kind of interface do you have for downloading?

 

A nine pin male? I'm not sure where to get the software.  If someone here doesn't know try cpaptalk.com

• ▶ Reply

Permalink Reply by Greg Kroemer on December 17, 2010 at 1:55pm

I believe it's a 9 pin male plug.  I looked the other day and I'm pretty sure that's what I saw.

• ▶ Reply

Permalink Reply by Mary Z on December 17, 2010 at 2:49pm

Once you get the software you need a nine pin to usb nullmodem cable and a male to female adaptor.  You can use a null modem adaptor.  Should all be available at Radio Shack.

Greg Kroemer said:

I believe it's a 9 pin male plug.  I looked the other day and I'm pretty sure that's what I saw.

• ▶ Reply

Permalink Reply by Tom Cannon on January 6, 2011 at 5:35pm

Hi Mary Z

 

My DME got the drop on this newbie to the wonderful world of OSA and sold me a very expensive BiPap machine $2,000+, a ResMed VPAP S. It is a very capable machine but I got none of the software that would allow me to take advantage of its advanced capabilities.

 

So am I in the same boat as Greg with his VPAP Adept SV machine? And if you know of sources for the softwar could you point me in the right direction?

 

Thanks, Tom

• ▶ Reply

Permalink Reply by Mary Z on January 7, 2011 at 1:55pm

I would try cpaptalk.com for a link to the software.  They can also give you the info for the data cable if the have the nine pin male connector.  You did get a great machine.  Good luck.  If you have any more questions, feel free to ask.

Mary Z.

Tom Cannon said:

Hi Mary Z

 

My DME got the drop on this newbie to the wonderful world of OSA and sold me a very expensive BiPap machine $2,000+, a ResMed VPAP S. It is a very capable machine but I got none of the software that would allow me to take advantage of its advanced capabilities.

 

So am I in the same boat as Greg with his VPAP Adept SV machine? And if you know of sources for the softwar could you point me in the right direction?

 

Thanks, Tom

• ▶ Reply

▶ Reply to Discussion